BDDHL - ORGANIC PAINT REMOVER

  • MSDS: BDDHL
  • Manufacturer: 4 TEK INDUSTRIES INC
  • Product Name: ORGANIC PAINT REMOVER
  • National Stock Number: 8010-00-160-5799
Product Identification

Product ID:ORGANIC PAINT REMOVER
MSDS Date:01/01/1987
FSC:8010
NIIN:00-160-5799
MSDS Number: BDDHL

Responsible Party
4-TEK INDUSTRIES, INC.

Emergency Phone: 206-392-9137

Cage: 9W240

Contractor
GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SVC
HWY WASHINGTON, DC 20406 US

Telephone: 206-485-1976

Cage: 80244

Ingredients

SOLVENTS


CHLORINATED HYDROCARBON

Fraction By Weight: 80%

ACGIH TLV: 500


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10 - 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHYL ALCOHOL

Fraction By Weight: 10%

ACGIH TLV: 200

Hazards

Effects of Overexposure:REMOVE INDIVIDUAL TO FRESH AIR, IF BREATHING IS
DIFFICULT, ADMINISTER OXYGEN.DO NOT USE STIMULANTS.

First Aid

First Aid:CALL A DR.

Fire Fighting

Lower Limits:1.27
Upper Limits:12-8
Extinguishing Media:WATER FOG, CO*2,DRY CHEMICAL
Fire Fighting Procedures:HEAT CAN CAUSE TOXIC MATERIALS,HYDROGEN
CHLORIDE & PHOSGENE
Unusual Fire/Explosion Hazard:SELF-CNTND BRTHG APPARATUS.LOW FIRE &
EXPLOSION AT NORMAL TEMPERATURES.

Accidental Release

Spill Release Procedures:STOP SPILL AT SOURCE,KEEP UNPROTECTED PEOPLE
FROM AREA, MATERIAL MUST BE TAKEN UP WITH INERT ABSORBANT MATERIAL.

Handling

Handling and Storage Precautions:KEEP IN COOL PLACE.
Other Precautions:OVER EXPOSURE CAN RAISE CO*2 IN BLOOD.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED IF TLV IS EXCEEDED
Ventilation:LOC EXHAUST-YES MECHANICAL-YES
Protective Gloves:CHEM RESISTANT
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

HCC:T4
Boiling Pt:B.P. Text:104 F
Vapor Pres:340
Vapor Density:2.9
Spec Gravity:1.30
Evaporation Rate & Reference:ETHER 1.80
Appearance and Odor:TRANSLUCENT ETHER-LIKE ODOR
Percent Volatiles by Volume:99.+

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXPOSURE TO PURE OXYGEN & HIGH
TEMPERATURES
Conditions to Avoid Polymerization:EXPOSURE TO PURE OXYGEN & HIGH
TEMPERATURES.

Disposal

Waste Disposal Methods:DISPOSE ACCORDING TO LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.